Description
The Eden Perfection, LLC Flat Trigger for the FNH Five-seveN lets you take your pistol to the next level.
- Flat face for consistent pull.
- Easy set-screw adjustment lets you remove most of the take-up from your trigger pull.
- When adjusted to full potential, the trigger face will sit slightly farther to the rear than the factory trigger.
The top of the firing pin safety lever will likely need to be re-contoured to ensure proper function of the firing pin safety. See product images for “factory” vs. “modified.” We’ll do this modification for free to make your gunsmith’s life a little easier – all you need to do is send us your safety lever. When placing your trigger order, select “I will send my FPS Lever” in the options. Send your FPS lever with a copy of your order to the address below. We’ll modify it and ship it back with your trigger. Safety function should always be checked to determine if further fitting is required.
Send to:
Eden Perfection, LLC
118 County Road 9152
Nacogdoches, TX 75964
For reference, the FPS lever is part number F862660300 which can be seen here: https://www.midwestgunworks.com/page/mgwi/prod/F862660300.
Our triggers are machined from billet 6061 T6 Aluminum and are hard coat anodized black per MIL-A-8625 Type III Class 2. Each trigger ships with an Allen wrench, set screw with pre-applied thread locker, and an extra set screw with no thread locker (useful during installation).
*Fitting may be required. Should be installed by an FNH armorer or competent gunsmith with an understanding of the Five-seveN pistol. Due to tolerance stack-ups and the fact that the Five-seveN wasn’t originally designed with an adjustable trigger, it may be necessary to modify the trigger to ensure it does not contact the safety cross-bar before allowing the hammer to be released. This is a simple but permanent modification, so it is important to work carefully during this step. It is also likely that the firing pin safety lever will need to be modified to ensure proper function of the firing pin safety. We offer a re-contouring service as noted above to facilitate proper function, but It is the user’s responsibility to ensure the firearm is functioning properly.
*Eden Perfection, LLC is not liable for any issues that arise due to previous or other modification to customer’s firearms.
*Five-seven® is a registered trademark of FN Herstal Corporation.
